你好
我唸研究所是2002 - 2004 年的事
工作一段時間，現在回部隊當兵
可能有些跟學術研究 脫節了
有份程式是外國人寫的
http://inrg.csie.ntu.edu.tw/802153_extension/ns2extension.html
我研究所的程式是拿上面的來改
我的程式沒有整理
也不知道compile會不會過
日後若有整理，再通知您
anyway, 用什麼工具都好
理性的去分析他的優劣吧
要用ns2寫也可以
但要思考時間來不來得及
謝坤龍
在 2006/11/28，clarencewu 撰寫：
我做的研究是scatternet的封包排程效能分析
不知道是否有簡單的程式可供參考？
我必須調整gateway停留在piconets的時間做效能分析
雖然我有寫Matlab做這樣的模擬，但是總感覺不太安心
而我的老師又建議我可以用ns2，所以才會有此需求
如果有讓你感到麻煩，那我先說聲抱歉
Thursday, August 14, 2008
Re: Inquiring about ns2 extension for MAC 802.15.3
Hello,
I am currently servicing in military,
so I turn on my computer once in one week.
I have graduate form school, and ns-2 with 802.15.3 is my project in school.
About your question,
You can explorer the document in the tar ball of my site:
http://inrg.csie.ntu.edu.tw/802153_extension/ns2extension.html
and search "Mustafa Demirhan" for his paper,
and look for the ns-2 mail list on
http://www.isi.edu/nsnam/ns/ns-lists.html
The information above may be useful.
Best regards,
Kun-Lung Hsieh
2007/2/14, Khaled amailef:
Hi ,
First I wanna thank you for the all information you provide. I am interesting in WPAN.
I run
I am just wondering how can I measure the following parameters:
1- End to End Delay
2- Packet loss and
3. Job Failure Rate ( JFR)
are there any TCL scripts for that?
I am currently servicing in military,
so I turn on my computer once in one week.
I have graduate form school, and ns-2 with 802.15.3 is my project in school.
About your question,
You can explorer the document in the tar ball of my site:
http://inrg.csie.ntu.edu.tw/802153_extension/ns2extension.html
and search "Mustafa Demirhan" for his paper,
and look for the ns-2 mail list on
http://www.isi.edu/nsnam/ns/ns-lists.html
The information above may be useful.
Best regards,
Kun-Lung Hsieh
2007/2/14, Khaled amailef:
Hi ,
First I wanna thank you for the all information you provide. I am interesting in WPAN.
I run
I am just wondering how can I measure the following parameters:
1- End to End Delay
2- Packet loss and
3. Job Failure Rate ( JFR)
are there any TCL scripts for that?
Re: MAC 802.15.3 NS2 extension
親愛的朋友您好：
我是謝坤龍，
謝謝你來信與我討論有關 802.15.3a 或 UWB 相關的議題
有關這方面的研究
是我在 2002 - 2004 年唸研究所時所做的
目前我人已經在工作，並且也不再繼續研究以上相關議題
限於時間與精力，很抱歉無法提供相關的訊息給您。
所以有程式碼都放在
http://inrg.csie.ntu.edu.tw/802153_extension/ns2extension.html
這份程式碼是 Mustafa Demirhan 所寫的
如欲進行相關研究，可以對它的 source code 做研究
再次對無法提供相關協助說聲抱歉
並祝您工作(研究)順利!
謝坤龍
2007/6/15, zoujian:
HI,
很抱歉冒昧地打擾您.
我正在做有關802.15.3協議的仿真,在您的網頁下載了兩個壓縮包:802.15.3.tar, howto.tar. 要在NS2中使用802.15.3,需要重新make.但我不知道怎樣修改makefile.in文件,以及需要複製哪幾個文件到ns-2.28/mac目錄下.請賜教!
我是謝坤龍，
謝謝你來信與我討論有關 802.15.3a 或 UWB 相關的議題
有關這方面的研究
是我在 2002 - 2004 年唸研究所時所做的
目前我人已經在工作，並且也不再繼續研究以上相關議題
限於時間與精力，很抱歉無法提供相關的訊息給您。
所以有程式碼都放在
http://inrg.csie.ntu.edu.tw/802153_extension/ns2extension.html
這份程式碼是 Mustafa Demirhan 所寫的
如欲進行相關研究，可以對它的 source code 做研究
再次對無法提供相關協助說聲抱歉
並祝您工作(研究)順利!
謝坤龍
2007/6/15, zoujian:
HI,
很抱歉冒昧地打擾您.
我正在做有關802.15.3協議的仿真,在您的網頁下載了兩個壓縮包:802.15.3.tar, howto.tar. 要在NS2中使用802.15.3,需要重新make.但我不知道怎樣修改makefile.in文件,以及需要複製哪幾個文件到ns-2.28/mac目錄下.請賜教!
Re: ns2 extension for MAC 802.15.3
Hi, alley,
ns-2 and its 802.15.3 extension is my graduate school work.
That is 6 years ago.
You can find ns-2 mail list for help or try to search other forum about that.
Sorry for nothing helpful to you.
Kun-Lung Hsieh
2008/5/6, alley1211 :
Hello.
I am a student in China.I have download the package from your website
http://inrg.csie.ntu.edu.tw/802153_extension/ns2extension.html
And I have run it under the ns-2.29, but i have encounted i serious problem
"egmentation fault". I have spend much time to solve it, but i can't. I used
the tool "GDB" to debug it. And it point to the sentence
"if(h->seqno_ [flowindex] && h->seqno_ [flowindex] == mh->seq_no_)".
thanks for you help.
Alley
ns-2 and its 802.15.3 extension is my graduate school work.
That is 6 years ago.
You can find ns-2 mail list for help or try to search other forum about that.
Sorry for nothing helpful to you.
Kun-Lung Hsieh
2008/5/6, alley1211 :
Hello.
I am a student in China.I have download the package from your website
http://inrg.csie.ntu.edu.tw/802153_extension/ns2extension.html
And I have run it under the ns-2.29, but i have encounted i serious problem
"egmentation fault". I have spend much time to solve it, but i can't. I used
the tool "GDB" to debug it. And it point to the sentence
"if(h->seqno_ [flowindex] && h->seqno_ [flowindex] == mh->seq_no_)".
thanks for you help.
Alley
Re: 您好，想請問您有關NS2模擬802.15.3的問題
你好，
802.15.3 ns2 extension 是 我研究所時做論文用的。
但而我已經畢業快4年，沒有碰ns2很久了。
我們當初是在 Linux Redhat 7.3 上面run 的
如果我沒記錯的話，
我放上去的當是 all-in-one tar ball
就整個解壓縮編譯就可以了
或許有些要設為可執行? chmod...
編譯的問題，不妨可以請教 linux/unix 嫺熟的同學一起研究
不好意思因為我太久沒碰了，沒法幫上你的忙
謝謝
謝坤龍
在 2008/5/16， earlyshen@ 撰寫：
我是----大三的學生
抱歉打擾了
這個學期我修習了一門"無線通訊網路導論"
期末專題為同學們自行尋找與無線相關的議題來做ns2模擬
我們這組對於802.15.3這個主題有興趣
透過google搜尋找到您曾經發布由Mustafa Demirhan完成的802.15.3 ns2 extension
我們試著使用各種方式來編譯它
直接使用./install或是抓出ns-2.1b9單獨編譯都不行
即使換成舊的版本的gcc(gcc3.7, gcc3.2.3)也是無法成功編譯
想請問您當初在跑這個模擬的時候
是使用哪一個版本的gcc？
在什麼樣的環境中編譯？
有什麼要特別注意的事情嗎？
感謝您看完這封信
如果有時間的話麻煩您撥空回答我的問題
感激不盡
802.15.3 ns2 extension 是 我研究所時做論文用的。
但而我已經畢業快4年，沒有碰ns2很久了。
我們當初是在 Linux Redhat 7.3 上面run 的
如果我沒記錯的話，
我放上去的當是 all-in-one tar ball
就整個解壓縮編譯就可以了
或許有些要設為可執行? chmod...
編譯的問題，不妨可以請教 linux/unix 嫺熟的同學一起研究
不好意思因為我太久沒碰了，沒法幫上你的忙
謝謝
謝坤龍
在 2008/5/16， earlyshen@ 撰寫：
我是----大三的學生
抱歉打擾了
這個學期我修習了一門"無線通訊網路導論"
期末專題為同學們自行尋找與無線相關的議題來做ns2模擬
我們這組對於802.15.3這個主題有興趣
透過google搜尋找到您曾經發布由Mustafa Demirhan完成的802.15.3 ns2 extension
我們試著使用各種方式來編譯它
直接使用./install或是抓出ns-2.1b9單獨編譯都不行
即使換成舊的版本的gcc(gcc3.7, gcc3.2.3)也是無法成功編譯
想請問您當初在跑這個模擬的時候
是使用哪一個版本的gcc？
在什麼樣的環境中編譯？
有什麼要特別注意的事情嗎？
感謝您看完這封信
如果有時間的話麻煩您撥空回答我的問題
感激不盡
Re: ns2_ieee_802_15_3
Hi, Tamim,
The 802.15.3 simulation is my school work 4 years ago.
In that time, I use Redhat 7.3 for its platform.
http://inrg.csie.ntu.edu.tw/802153_extension/ns2_802_15_3.tar.gz
is a all-in-one tar ball.
You can extract it and run install.sh to build the whole package.
You will need to fix some compile error.
If you want to port it to ns2.33 or Ubuntu, you must spend additional
effort.
Thanks.
Frank Hsieh
2008/7/31 Tamim Ibrahim
> hey buddy Iam new on ns2 platform and I already installed ns2.33 on Linux
> Ubuntu, now i want to install the* Mustafa Demirhan 802.15.3 extension
> *but i dont how to do that* , *can you* *help please ?
>
> thanks in advance
>
The 802.15.3 simulation is my school work 4 years ago.
In that time, I use Redhat 7.3 for its platform.
http://inrg.csie.ntu.edu.tw/802153_extension/ns2_802_15_3.tar.gz
is a all-in-one tar ball.
You can extract it and run install.sh to build the whole package.
You will need to fix some compile error.
If you want to port it to ns2.33 or Ubuntu, you must spend additional
effort.
Thanks.
Frank Hsieh
2008/7/31 Tamim Ibrahim
> hey buddy Iam new on ns2 platform and I already installed ns2.33 on Linux
> Ubuntu, now i want to install the* Mustafa Demirhan 802.15.3 extension
> *but i dont how to do that* , *can you* *help please ?
>
> thanks in advance
>
Re: Need help: ns2 802.15.3 mustafa extension
you should change the file mode of install.sh.
ex:
chmod 777 install.sh
---
Frank
2008/8/15
> Dear Hsieh,
>
> This is Wei Zhou at ---. I just donwloaded ns2 Mustafa
> 802.15.3 extension from your website and try to install it on Ubuntu.
>
> After extracting the tar I execute "./install", but I always got
> "permission denied", even using root, do you any idea what could be the
> problem? I didn't meet this problem when using the ns2-2.33 tar downloaded
> from is website.
>
> Thanks in advance!
>
> -Wei Zhou
ex:
chmod 777 install.sh
---
Frank
2008/8/15
> Dear Hsieh,
>
> This is Wei Zhou at ---. I just donwloaded ns2 Mustafa
> 802.15.3 extension from your website and try to install it on Ubuntu.
>
> After extracting the tar I execute "./install", but I always got
> "permission denied", even using root, do you any idea what could be the
> problem? I didn't meet this problem when using the ns2-2.33 tar downloaded
> from is website.
>
> Thanks in advance!
>
> -Wei Zhou
Subscribe to:
Posts (Atom)